Description
Jabsco Flexible Impeller Kit – 10 Blade Neoprene, Spline Drive
The Jabsco Flexible Impeller Kit is designed for compatible bronze flexible impeller pumps used in marine engine cooling, bilge, transfer, and general-purpose pumping applications. This replacement impeller features a 10-blade neoprene construction, spline-drive configuration, and brass insert.
Jabsco flexible impellers are manufactured through rigorous quality processes for consistent fit and reliable operation in compatible marine pump applications. Always verify the pump model and original impeller specifications before ordering.
Impeller Specifications
- Material: Neoprene
- Drive Type: Spline Drive
- Number of Blades: 10
- Diameter: 2-1/4"
- Shaft Width: 5/8"
- Shaft Diameter: 2"
- Insert Material: Brass
Marine Flexible Impeller Applications
Jabsco flexible impellers are designed for use in compatible bronze flexible impeller pumps, including applications involving marine engine cooling, bilge pumping, water transfer, and general-purpose pumping.
Proper fit is essential when replacing a marine pump impeller. Before ordering, compare the replacement with your original impeller or pump specifications, including diameter, shaft dimensions, drive type, blade count, and insert configuration.
Preventative Impeller Maintenance
Jabsco recommends replacing impellers at least once a year, or sooner depending on engine duty and operating conditions. While a properly installed impeller may remain serviceable for longer in some applications, following a preventative maintenance schedule can help avoid unexpected impeller problems.
Always keep a spare impeller on board. A replacement impeller is an important addition to an onboard marine maintenance kit, particularly for boats using impeller pumps for engine cooling and other essential pumping applications.
Impeller Replacement Instructions
To replace the impeller, remove the pump end-cover screws and carefully remove the existing impeller. A Jabsco Impeller Removal Tool can be used to grip the impeller hub. Channel-lock pliers may also be used when appropriate.
Do not use screwdrivers to pry out the impeller. Prying against the pump body can damage the pump face or sealing surface, potentially resulting in leaks.
Before installing the replacement impeller, grease the new impeller with a lubricant recommended for the pump and impeller material. Greasing helps make installation easier and provides lubrication during initial pump priming. After installing the impeller, replace the gasket and reinstall the pump end cover according to the pump manufacturer's instructions.
Shop Jabsco Flexible Impeller Kits
Maintain your boat's marine engine cooling, bilge, transfer, and general-purpose pumping systems with the correct Jabsco replacement impeller. Always confirm the pump application and dimensions before ordering.
SHOP NOW for Jabsco flexible impellers, marine impeller kits, boat pump parts, and marine maintenance supplies at U.S. Boating & Marine Supplies.
Specifications
- California Residents:
- WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
