Description
Turning Point Hustler 3 Blade 14.25x 17P Propeller 2150-1711
Turning Point Hustler 3 Blade 14.25x 17P Propeller 21501711 is a 3-blade aluminum propeller with a 14.25-inch diameter and 17-inch pitch. It uses Turning Point's interchangeable hub system, allowing the propeller housing and application-specific hub kit to be selected separately.
Features
- Squeeze-cast aluminum construction for added blade strength
- Performance-tuned rake angles support boat lift and overall performance
- Progressive pitch angles are designed to reduce slip and support efficient operation
Specifications
- Material: Aluminum
- Blades: 3
- Diameter: 14.25"
- Pitch: 17"
- Rotation: Right Hand Standard
- Hub Series: Square
Hub kit not included. Select the hub kit that matches both this propeller's hub series and the complete engine application shown below.
Hub Kit Application Chart
Match the engine manufacturer, model, stroke or cycle, year, spline count, and gearcase information. Horsepower alone does not establish fitment.
| Manufacturer | Engine Model | |
Cycle | Stroke/Cycle | Years | Hub Kit | Spline | Gearcase |
|---|---|---|---|---|---|---|---|---|
| Evinrude/Johnson | 100HP Commercial | V4 & V6 large gearcase | |
|
|
502 | 15 | 4.25" |
| Evinrude/Johnson | 120HP | V4 & V6 large gearcase | |
|
1985 | 502 | 15 | 4.25" |
| Evinrude/Johnson | 130HP | V4 & V6 large gearcase | |
|
1995-1996 | 502 | 15 | 4.25" |
| Evinrude/Johnson | 140HP | V4 & V6 large gearcase | |
|
1985 | 502 | 15 | 4.25" |
| Evinrude/Johnson | 115HP, 130HP | Pleasure | |
|
1995 & Newer | 502 | 15 | 4.25" |
| Evinrude/Johnson | 150, 200, 225, 250HP | H.O | |
|
1995 & Newer | 502 | 15 | 4.25" |
| Evinrude/Johnson | 135HO-250HP | V6 | |
|
1995 & Newer | 502 | 15 | 4.25" |
| Evinrude/Johnson | 250HP-300HP | V8 | |
|
1995 & Newer | 502 | 15 | 4.25" |
| Evinrude/Johnson | 90HP, 115HP, 130HP | E-TEC(not E-TEC G2 | |
|
2009-2010 | 502 | 25 | 4.25" |
| Evinrude/Johnson | 135HP-300HP | E-TEC(not E-TEC G2 | |
|
2009-2010 | 502 | 25 | 4.25" |
| Honda | BF115D, BF135, BF150, BF200 | E-TEC(not E-TEC G2 | |
|
2002-2012 | 507 | 15 | 4.25" |
| Honda | BF225 | E-TEC(not E-TEC G2 | |
|
2002-2012 | 507 | 15 | 4.25" |
| Honda | BF200A | E-TEC(not E-TEC G2 | |
|
2013 & Newer | 508 | 15 | 4.25" |
| Honda | BF225A | E-TEC(not E-TEC G2 | |
|
2013 & Newer | 508 | 15 | 4.25" |
| Honda | BF250A | E-TEC(not E-TEC G2 | |
|
2012 7 Newer | 508 | 15 | 4.25" |
| Mercury & Mariner | V6: 135-300HP | Does not fit Pro XS | |
|
2012 7 Newer | 501 | 15 | 4.25" |
| Mercury & Mariner | Verado: 135-275HP | Does not fit Pro XS | |
|
2012 7 Newer | 501 | 15 | 4.25" |
| Mercury & Mariner | OptiMax: 150, 200, 250HP | Does not fit Pro XS | |
|
2012 7 Newer | 501 | 15 | 4.25" |
| MerCruiser | Alpha One and Bravo One | Does not fit Pro XS | |
|
1983 & Newer | 501 | 15 | 4.25" |
| OMC | Cobra 800: 3.0L - 7.5L | Does not fit Pro XS | |
|
1983 & Newer | 502 | 15 | 4.25" |
| OMC | King Cobra: 454, 502 | Does not fit Pro XS | |
|
1983 & Newer | 502 | 15 | 4.25" |
| OMC | Sea Drive: 2.0-4.0L | Does not fit Pro XS | |
|
1983 & Newer | 502 | 15 | 4.25" |
| Tohatsu | BFT115, BFT150, BFT200, BFT225, BFT250 | Does not fit Pro XS | |
|
1983 & Newer | 508 | 15 | 4.25" |
| Volvo Penta SX & OMC SX Cobra | 3.0L - 8.2L | Not available for Volvo DuoPro or Aquamatic drives | |
|
1994 & Newer | 504 | 15 | 4.25" |
| Yamaha | 150 - 250HP | 2 & 4 | |
|
1994 & Newer | 504 | 15 | 4.25" |
| Yamaha | Stern drives 3.0 - 7.4L | 2 & 4 | |
|
1994 & Newer | 504 | 15 | 4.25" |
Note: Turning Point Express propellers utilize an interchangeable hub design. You will need to select the correct Turning Point Hub Kit matching your specific engine spindle/spline configuration to complete installation.
How can I confirm this propeller is right for my boat?
Use U.S. Boating & Marine Supplies Propeller Finder to compare compatible propeller options for your boat and engine.
Specifications
- Diameter (Inches):
- 14-1/4"
- Material:
- Aluminum
- Pitch:
- 17
- Rotation:
- Right
- California Residents:
- WARNING Cancer - www.P65Warnings.ca.gov